Industrial Oil

These oils are formulated with high quality base stocks and carefully selected additive system that result in finished products to provide many desirable features, to work with systems operating under moderate to severe conditions where a high level of anti-wear protection is required.

Specification:

These products are high performance neat cutting fluids, designed for a wide range of applications. The product meet the highest demands of operating, cutting conditions, tools & work piece materials. Each of these products differ in their viscosity & other characteristics etc. to cover a wide range of applications. These products offer stable oil film, excellent heat dissipation, EP properties & improved surface finish.

Specification:

These are high performance products designed for heat transfer in Textile, Pharmaceutical, Chemical and Processing Industries, equipped with indirect or secondary heating systems. They possess excellent resistance to thermal cracking and chemical oxidation and are non-corrosive and non-toxic. They possess high specific heats and thermal conductivities that provide good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures.


Specification:

These are high quality, low viscosity lubricant manufactured from solvent refined, high viscosity index base oils, having good film strength property, chemical and oxidation stability, besides excellent ability to separate from water. They provide economical bearing lubrication of high-speed textile spindle, machine tool spindles and protect from excessive wear.


Specification:

These oils are formulated from highly refined mineral oils and contain a combination of chemical active & polar additives. These oils have excellent extreme pressure (E.P) properties & during thermal degradation they forms a strong protective oil film which is capable of undertaking heavier loads, reduce friction & provides the best protection for the work pieces & dies. They also provide excellent antiwear & cooling performance during operation & extend the life of dies.

Specification:

It is a premium quality red dyed transmission oil having a low coefficient of friction to meet General Motors Type A Suffix A Specifications.

Features:

• High thermal and oxidation stability.
• Good detergent – dispersant, antiwear, anticorrosion properties.
• Provides excellent power shift transmission, even at low temperature.
• Reduces gear wear.
• Improves life of transmission & steering system.
• Compatible with various type of seal materials.

Application:

• Lubrication of synchromesh gears and automatic power steering units of automobiles and LCVs requiring Type A Suffix A fluid.

Performance Level

• TES 122 of Detroit Diesel Allison, General Motors Type A Suffix A specifications.

Packing:

• 210 Ltr., 50 Ltr., 20 Ltr., 5 Ltr., 1 Ltr., 500 ml.

These oils are formulated from selected lube base stocks to provide low pour point, low floe point, good solubility in liquefied refrigerants & good chemical stability. They possess high fluidity at very low temperatures, resist deposit formation & have reduced tendency to foam. These oils ensure higher condenser efficiency and reduced compressor valve maintenance due to less deposits. These oils also imparts antiwear & rust protection properties.

Specification:

These lubricants are specially developed to meet the requirements of heavily loaded mill roll bearings in sugar mills. These oils are formulated with high viscosity lubricating oil base stocks and fortified with selected non-toxic mild EP and special compounding agents. They possess excellent resistance to leakage and protect the bearings against corrosion and wear.


Specification:

These products are non-staining, high performance mineral oil based lubricant, having good cooling abilities. They are specially developed for high speed and deep drawing application of metals. They provide optimum film strength, lubricity and good metal wetting characteristics.

Specification:

These are premium quality water-soluble oil free fully synthetic type Coolant, specially developed for use on ferrous metals only. These oils does not undergo bacterial degradation and leave objectionable odour. Further These are non foaming, non toxic, non hazardous, thus ensuring total safety of the workmen. These are operator friendly and economical in use due to high mixing ratio and long service life.

Specification:

These are premium quality water soluble cutting oils, specially developed to form extremely stable milky emulsion even with extreme hard water (400 ppm) leading to excellent tool life and finish, in all metal cutting operations, where cooling is more important than lubrication. They have excellent antirust and antifroth quality and causes no corrosion of machine, work piece or tool. They does not decompose chemically; leave objectionable odour, cause discoluration and staining. These are operator friendly and economical in use.

Blended from refined mineral oil, emulsifier and other additives. and fortified with EP additive to suit wider range of metalworking operations. It has long service life even in hard water up to 600ppm, provides better lubricity and anti-wear properties.
Recommended for cutting, drilling, shaping, grinding, and other metal removal operations of ferrous and non ferrous materials where high quality of coolant is required.